◉ Material comparison

Elastomers, in the language of the standard.

The polymers used in our technical rubber compounds. The letters are the ASTM D2000 / SAE J200 classification; the temperature is not a service temperature but the heat-ageing test temperature of the classification.

PolymerASTM D1418 abbreviationASTM D2000 type/class (most common) [S1]Type test temperature [S2]Class: max. swell in IRM 903 oil [S2]Note
EPDMEPDM AA · BA · CA · DA A: 70 °CB: 100 °CC: 125 °CD: 150 °C A: no requirement (no oil resistance expected) Its fully saturated backbone gives high resistance to weathering, UV and heat [S3]. Class A: no resistance to mineral oil is expected [S1, S2]. [S1][S2][S3][S7]
Nitrile (NBR)NBR BF · BG · BK · CH B: 100 °CC: 125 °C F: ≤ 60 %G: ≤ 40 %K: ≤ 10 %H: ≤ 30 % Oil swell classes (F, G, K, H) correspond to low swell [S1, S2]. [S1][S2][S7]
Chloroprene (CR, neoprene)CR BC · BE B: 100 °C C: ≤ 120 %E: ≤ 80 % [S1][S2][S7]
Styrene-butadiene (SBR)SBR AA A: 70 °C A: no requirement (no oil resistance expected) Class A: no resistance to mineral oil is expected [S1, S2]. [S1][S2][S7]
Silicone (VMQ)VMQ FC · FE · GE F: 200 °CG: 225 °C C: ≤ 120 %E: ≤ 80 % [S1][S2][S7]
Ethylene acrylic (AEM)AEM EE E: 175 °C E: ≤ 80 % [S1][S2][S7]
Fluoroelastomer (FKM, “Viton”)FKM HK H: 250 °C K: ≤ 10 % [S1][S2][S7]
EPDM sponge (cellular)EPDM – – – Sponge/cellular rubbers are classified not by ASTM D2000 but by ASTM D1056 (type, class, grade) [S6]. [S6][S7]

The values are the letters most often matched to the material family in the classification; they are not properties of a specific product. Ask our laboratory for a recipe-specific test report for your application.

Sources

  1. [S1] Ames Rubber Manufacturing, “Understanding ASTM D 2000 and SAE J200” (Table 4: polymers most often used for each type/class)
  2. [S2] RPM Rubber Parts, Technical Information and Reference (ASTM D2000 type temperature and class swell tables)
  3. [S3] G. Li, S. Bawiskar, S. Wu (Dow), “How to control porosity in extruded EPDM dense profile”, Rubber & Plastics News, 22 March 2021, pp. 14–17
  4. [S6] ASTM D1056-20, Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
  5. [S7] DERUNLAS product information (derunlas.com content): compounds based on SBR, NBR, CR, EPDM, silicone, Viton (FKM), AEM

◉ Quote request

Tell us about your project.