◉ Evidence archive

Not claims,
documents.

Three management system certificates, EN 45545-2 HL3 fire test reports and 16 test methods. Scroll: the cards fly in, stack up and fan out. Click a card to open it full size.

SCROLL ↓
01 / 07

ISO 9001:2015

Quality Management System

All documents

Archive

Laboratory

16 test methods.

  1. 01DensityDIN 4698 / DIN 53515

    Mass per unit volume of the rubber at a given temperature, expressed in Mg/m³.

  2. 02RheometerTS 8969 / ASTM D5289 / DIN 53529-3

    Checks the cure characteristics of the compound and batch-to-batch consistency.

  3. 03Mooney ViscosityTS 2009-1 / ISO 289-1/2

    Determines the flow and shaping behaviour of the elastomer and the fluidity of the compound.

  4. 04HardnessTS ISO 7619-1 / ASTM D2240 / DIN 53505

    Measures elastomer hardness on the Shore A scale.

  5. 05Tensile StrengthTS ISO 37 / ASTM D412 / DIN 53504

    Determines the resistance of the specimen to elongation until break.

  6. 06Tear PropertiesDIN 4698 / DIN 53515

    Determines the ratio of the maximum tearing force to thickness.

  7. 07Burning (Flame Resistance)DIN 4102 / UL 94 / ASTM D635

    Determination of burning rate in a defined set-up (angle, time, position).

  8. 08Carbon Black DispersionISO 11345

    Evaluates the dispersion of filler in the rubber.

  9. 09Adhesion TestsTS ISO 813

    Shows the strength of the bond between rubber and metal, plastic, etc.

  10. 10High-Temperature AgeingTS ISO 188 / ASTM D573

    Change of properties after ageing at 10–300 °C, evaluated as a percentage.

  11. 11Low-Temperature AgeingTS 4709

    Determines deterioration after cooling between −50 °C and 0 °C.

  12. 12Ageing in LiquidsTS ISO 1817

    Change of properties after ageing in oil, water and other liquids.

  13. 13Ash ContentTS 336 / ISO 247 Met. A

    Organic/inorganic and filler content determined by combustion at 850–1000 °C.

  14. 14ResilienceTS 9568

    Return to original shape when the load is removed; ratio of returned to applied energy.

  15. 15Compression SetTS 8785 / ISO 6471 / ASTM D395

    Determination of permanent deformation under compression.

  16. 16Abrasion ResistanceDIN 53516 / ISO 4649 / ASTM D5963

    Determination of material loss under abrasive conditions.

◉ Quote request

Tell us about your project.